ZOWIE XL2740 TN 240Hz 27 Inch Gaming Monitor for Esports

Monitors are passive devices and, therefore, require a graphics card to output compatible signals to enable Variable Refresh Rate (VRR) features. So the first step we would like to suggest is to check if your graphics card supports VRR technology (The name of VRR technology may vary from Adaptive-Sync, FreeSync to G-Sync).

For the Nvidia graphics card, please check it here

For AMD graphics card, please check it here

Second, check if your monitor features the VRR function.

Our models feature with VRR function below:

XL2730Z, XL2540, XL2546S, XL2731, XL2740, XL2746S, XL2540K, XL2540KE, XL2546K, XL2731K, XL2746K, XL2566K, XL2546X, XL2586X, XL2566X+, XL2546X+, XL2586X+.

 

How to enable FreeSync through graphics card settings

How to enable G-Sync via graphics card settings

 

On the monitor, please turn off DyAc / DyAc+ / DyAc 2  (if your monitor has that feature) through the monitor menu, since DyAc function is not compatible with variable fresh rate technology. Then, turn on the Adaptive-Sync/FreeSync Premium function through the monitor menu.

Learn more about Variable Refresh Rate (FreeSync Premium / G-Sync Compatible / Adaptive-Sync)

Since everyone is unique, and have different vision conditions and sensation on color and brightness. Thus, The cause of the discomfort to everyone may be very different. Even if the monitor has the same settings and displays the same image, some people may feel uncomfortable, while others may not. Following are a few tips, and we suggest you can try to adjust to alleviate the discomfort condition:

The default color mode is "FPS1" mode, which is fine-tuned for scenes in CS:GO. 

*in some regions, the default color is set to "ECO" mode to meet the regulatory requirements.

*For XL-X models, "FPS1" mode is fine-tuned for CS2.
 

If your preference is far from those preset settings, you may try the “Standard" mode color first and further customize it to your preferred settings.

We highly encourage you to contact us on social media if you need further assistance.

It is highly unrecommended to use 3rd party video cable/adapters as not all of them have been tested and there could be compatibility problem, especially different cables spec and quality may vary. Please feel free to contact our online service for more assistance.

For 240Hz models, please check the following:

1. Make sure to use HDMI 2.0 or DP 1.2a cable.
2. If HDMI 2.0 cable is used, make sure to connect to the correct HDMI 2.0 port.
3. If DP1.2a cable is used, make sure to use the one bundled by ZOWIE.
4. Make sure to update to the latest graphic card driver version.
5. Make sure to check if the graphic card supports up to 240Hz.

 

For 360Hz models, please check the following:

1. Make sure to use DP 1.4 cable.
2. If DP 1.4 cable is used, make sure to use the one bundled by ZOWIE.
3. Make sure to update to the latest graphic card driver version.
4. Make sure to check if the graphic card supports up to 360Hz.

 

If you are running Win 10, follow this: Setting > System > Display > Advanced Display Settings > Display Adapter Properties.
Then click the “Monitor” tab, choose your preferred resolution and 240Hz/360Hz refresh rate from the “Screen Refresh Rate” list, and click “OK.”

 

If you are running Win 11, follow this: Setting > System > Display > Advanced Display > Display information > Choose a refresh rate. Then choose your 240Hz/360Hz refresh rate.

 

Or you can do the setting via GPU control panel

If it is NVIDIA GPU, please open the NVIDIA control panel, and then head to “Change Resolution” tab under the “Display” option, and then choose your preferred resolution under “PC (not Ulta HD, HD, SD)”, and choose “240Hz” / "360Hz" under “Refresh rate” option.

If it is AMD GPU, right click on your desktop and select “AMD Radeon Settings”, and then click on the “Display” option, and then you can choose your preferred resolution and 240Hz/360Hz under the Display options page.

We do not recommend using 3rd party switchers or adapters as not all of them have been tested and there could be a compatibility issue, especially when different cable differ in specifications and quality. Please feel free to contact our online service team for more assistance.

Please refer to the following video for a step by step tutorial that shows you how to enable VRR on PS5 and Xbox Series X/S for ZOWIE monitors:

Profile to Go is a S Switch-related function on selected XL series models which allows you to save your preferred monitor display settings and apply them to a different monitor of the same model. 

That is Overdrive/Response Time Compensation (RTC) function in RL/XL series. This technology is based on applying an over-voltage to the liquid crystals to motivate them into their orientation faster. We will usually quote a "grey to grey" (G2G) response time figure on displays using this technology since they are normally the fastest transitions available.

On ZOWIE website, we didn’t show response time to XL2546S and XL2546K as well as all our XL & RL series.

There is always a trade off between overdriving the panel to make it faster which results in bad display quality. XL series fully leverage the panel fast response, but also considering an optimized setting for the overall experience. It is suggested that you can check other user's sharing on website, or test it by yourself in person which would be ideal.

All ZOWIE monitors are mercury free.

Please refer to the AMD website for details on differences between various FreeSync versions :

Please refer to the Variable Refresh Rate (VRR) models listed below.

Sorry, the Display Pilot software has been phased out and we do not update it any longer.

Currently, only XL2540 & XL2740 are listed as G-Sync Compatible monitors.

For the latest G-Sync Compatible monitor list, please visit NVIDIA's website for the latest update.

 

But if your ZOWIE monitor has Adaptive-Sync / FreeSync Premium function, you can still enable the VRR feature with NVIDIA graphic cards.

Learn more about Variable Refresh Rate (FreeSync Premium / G-Sync Compatible / Adaptive-Sync):

This monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount or arm bracket. Please use M4x10mm screws and possible wall mount adapter accessory when doing the installation. Please check with the wall mount/arm kit vendor or check with ZOWIE RMA for further assistance if any.

All ZOWIE monitors support 100V~240V.

There is no standard input lag measurement in the industry, so we don’t list input lag numbers to avoid confusion. This model uses TN panel with fast response, we not only fine-tuned it to maximize its panel capability but also considering an overall smooth experience. We don’t sacrifice the overall experience for highlighting any specific spec number.

For 240Hz/280Hz models, we recommend graphic card should choose at least:

NVIDIA GeForce GTX 980 or better

AMD Radeon RX 480 or better

 

For 360Hz/400Hz models, we recommend that the graphic card should choose at least:

NVIDIA GeForce RTX 30 series Graphics Card or better

AMD Radeon RX 6000 series or better

 

For 540Hz/600Hz models, we recommend that the graphic card should choose at least:

NVIDIA GeForce RTX 40 series Graphics Card or better

AMD Radeon RX 7000 series or better

 

Note: For any questions regarding the compatibility and capability of your GPU, please contact your graphics card manufacturer.

No, this monitor does not have a built-in speaker.

Please refer to the compatible model list below.

NVIDIA G-Sync Compatible works only via DisplayPort 1.2 or later version. 

AMD FreeSync Premium works with HDMI 2.0 and DisplayPort 1.2 or later version.

Learn more about Variable Refresh Rate (FreeSync Premium / G-Sync Compatible / Adaptive-Sync)

This is normal behavior, much like making major changes to the graphics settings of a game. When FreeSync Premium is enabled or disabled with a game running, some games will be affected because graphics settings need to be reset for the change to take effect.

Solution

For 240Hz/280Hz models, please check the following:

1. Make sure to use an HDMI 2.0 or DP 1.2a cable.
2. If an HDMI 2.0 cable is used, make sure to connect to the correct HDMI 2.0 port.
3. If a DP 1.2a cable is used, make sure to use the one bundled by BenQ.
4. Make sure to update to the latest graphics card driver version.
5. Make sure that your graphics card supports 240Hz.
6. Install the monitor driver from ZOWIE official website. 
7. Please contact us (ZOWIE website: contact/RMA ) for further assistance if all you've tried all the above.

If the power LED is on or there is a beep sound:

Sorry, this should not happen in normal condition. Please contact our customer service. We'd like to investigate your monitor problem and provide further assistance.

Please check the followings:

1. Press the monitor's OSD control keys or 5-way controller and check the Input
    options to see if DisplayPort is selectable. If DisplayPort is not selectable,
    please ensure the DisplayPort cable is properly connected to both devices.

2. If the DisplayPort option is selectable but no signal appears on the screen,
    unplug the cable and plug it back in to allow the monitor to re-detect the
    connection.

3. If the issue persists, try connecting the monitor using HDMI to confirm that
    the monitor functions correctly, then attempt the DisplayPort connection again.

4. Ensure you have updated to the latest graphics card driver and motherboard
    BIOS version. If you cannot update the driver while connected via DisplayPort
    due to no signal, switch connections to HDMI if possible.

5. If possible, test the monitor with multiple devices using DisplayPort and verify
    that at least one device shows a signal. Trying different DisplayPort cables and
    cross-testing the cable with other devices may also help.

6. If the problem occurs suddenly after normal DisplayPort usage, use HDMI to
    ensure that DisplayPort is set to a resolution and refresh rate supported by the
    monitor.

If none of the above steps resolve the issue, the monitor may need inspection. Please contact our customer service team for further assistance.

Please refer to the following steps:

1. Unplug and reconnect the S Switch. Then, make sure it is connected to the monitor properly.
2. Reset the monitor by using "Reset All" in the "System" section of the main menu in the OSD.
3. Try to recreate the conditions that cause random colors when using an S Switch. If you are not sure what those conditions are, you can press the 1/2/3 buttons repeatedly to test functionality. 
4. If the problem persists, please contact us (ZOWIE website: contact/RMA ) for more assistance.

Any custom resolution/Hz setting may damage your monitor due to out of the operation range different from what the monitor has been designed for, and it may make your monitor out of warranty accordingly.

Please check the following steps:

 

A. Models with 144/165Hz:

1. For the newer models only with HDMI / DP port, please use a HDMI 1.4 / 2.0 cable or DP 1.2a cable that came with the monitor.
2. For the older models with DVI / DP port, please use a DVI-Dual Link cable or DP 1.2a that came with the monitor.
3. Make sure to update to the latest graphics card driver version.

 

B. Models with 240/280Hz:

1. Make sure to use an HDMI 2.0 or DP 1.2a cable.
2. If an HDMI 2.0 cable is used, make sure to connect to the correct HDMI 2.0 port.
3. If a DP 1.2a cable is used, make sure to use the one bundled by BenQ.
4. Make sure to update to the latest graphics card driver version.
5.  Make sure that your graphics card supports 240/280Hz.

C. Models with 360/400Hz:

1. Make sure to use a DP 1.4 cable that comes with the monitor.
2. Make sure to update to the latest graphics card driver version.
3. Make sure that your graphics card supports 360/400Hz.

D. Models with 540/600Hz:

1. Make sure to use the DP 1.4/HDMI 2.1 cable that came with the monitor.
2. Make sure to update to the latest graphics card driver version.
3. Make sure you are running Windows 11 and that it is up to date.   (Please note that Windows 10 has a limit of 500Hz.)
4. Make sure that your graphics card supports 540/600Hz.

• If you are running Win 10, follow this: Setting > System > Display > Advanced Display Settings > Display Adapter Properties. Then click the “Monitor” tab, choose your preferred resolution and refresh rate from the “Screen Refresh Rate” list, and click “OK.”
• If you are running Win 11, follow this: Setting > System > Display > Advanced Display > Display information >  Then choose your preferred refresh rate.

Or you can do the setting via the GPU control panel;

If it is NVIDIA GPU, please open the NVIDIA control panel, and then head to “Change Resolution” tab under the “Display” option, and then choose your preferred resolution under “PC (not Ultra HD, HD, SD)”, and choose your preferred refresh rate under “refresh rate” option.