Игровой Монитор для Киберспорта ZOWIE XL2746K 27-дюймов с частотой 240 Гц и технологией DyAc⁺™

На страницу продукта
  • I sometimes feel headaches or eyes soreness while using the monitor. What can be adjusted to alleviate the discomfort if I feel unwell?

  • Since everyone is unique, and have different vision conditions and sensation on color and brightness. Thus, The cause of the discomfort to everyone may be very different. Even if the monitor has the same settings and displays the same image, some people may feel uncomfortable, while others may not. Following are a few tips, and we suggest you can try to adjust to alleviate the discomfort condition:

    УЗНАЙТЕ БОЛЬШЕ
  • What is the optimal Hz performance for users to turn on the "DyAc", "DyAc+" or "Blur Reduction" function in the OSD?

  • УЗНАЙТЕ БОЛЬШЕ
  • Can I share my settings with a friend whose monitor is not on the list of XL Setting to Share compatible monitors?

  • УЗНАЙТЕ БОЛЬШЕ
  • Can I use any adapter to switch signals or different port types between the monitor and connected devices?

  • УЗНАЙТЕ БОЛЬШЕ
  • How to update firmware with a USB flash drive?

  • Please refer to the video at the link below for detailed instructions for updating firmware with a USB flash drive.

    УЗНАЙТЕ БОЛЬШЕ
  • What is the difference between DyAc and DyAc+?

  • DyAc+ is based on this same technology (DyAc) and through panel optimization (with little faster panel response), provides gamers with a different option for actions such as spray control.

    УЗНАЙТЕ БОЛЬШЕ
  • When I use the monitor with AMA function , its leaves a shade when scrolling the page, when turning OFF the AMA , the shadows issue doesn't happened. Is there any advice you can provide?

  • That is Overdrive/Response Time Compensation (RTC) function in RL/XL series. This technology is based on applying an over-voltage to the liquid crystals to motivate them into their orientation faster. We will usually quote a "grey to grey" (G2G) response time figure on displays using this technology since they are normally the fastest transitions available.

    УЗНАЙТЕ БОЛЬШЕ
  • Why don’t you share response times for XL and RL models on your website anymore?

  • On ZOWIE website, we didn’t show response time to XL2546S and XL2546K as well as all our XL & RL series.

    УЗНАЙТЕ БОЛЬШЕ
  • Since an official response time spec is not available anymore, what other response related spec should I check if I’m comparing your monitors with models from other brands?

  • There is always a trade off between overdriving the panel to make it faster which results in bad display quality. XL series fully leverage the panel fast response, but also considering an optimized setting for the overall experience. It is suggested that you can check other user's sharing on website, or test it by yourself in person which would be ideal.

    УЗНАЙТЕ БОЛЬШЕ
  • What VESA mount should I use on this monitor?

  • This monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount or arm bracket. Please use M4x10mm screws and possible wall mount adapter accessory when doing the installation. Please check with the wall mount/arm kit vendor or check with ZOWIE RMA for further assistance if any.

    УЗНАЙТЕ БОЛЬШЕ
  • What is minimum refresh rate that DyAc / DyAc+ is working?

  • The minimum refresh rate of enabling DyAc is 100hz. Higher refresh rate will provide a better DyAc performance.

    УЗНАЙТЕ БОЛЬШЕ
  • Which models are compatible with PS5 and Xbox Series X for 1080p @ 120hz?

  • Please refer to the compatible model list below.

    УЗНАЙТЕ БОЛЬШЕ
  • Why do some games exit when FreeSync Premium / Adaptive-Sync is turned off or on?

  • This is normal behavior, much like making major changes to the graphics settings of a game. When FreeSync Premium is enabled or disabled with a game running, some games will be affected because graphics settings need to be reset for the change to take effect.

    УЗНАЙТЕ БОЛЬШЕ
  • Why does my monitor keep showing no signal even though the DisplayPort cable is connected properly, and what should I do?

  • Please check the following:

    УЗНАЙТЕ БОЛЬШЕ
  • The monitor shows random colors onscreen when I use an S Switch. What can I do?

  • Please refer to the following steps:

    УЗНАЙТЕ БОЛЬШЕ
  • Why can't I save settings under Gamer1, Gamer2, and Gamer3 modes on my monitor?

  • For new K series monitors, the way to save settings via the S Switch has been changed. If Gamer1 is selected, the customized display setting is only saved in the monitor.

    УЗНАЙТЕ БОЛЬШЕ
  • Why my monitor doesn't work after creating a custom resolution to overclock the hz of the monitor?

  • Any custom resolution/Hz setting may damage your monitor due to out of the operation range different from what the monitor has been designed for, and it may make your monitor out of warranty accordingly.

    УЗНАЙТЕ БОЛЬШЕ
  • How do I set the monitor's refresh rate to the highest value as the monitor spec claimed (EX: 144, 165, 240, 360Hz)?

  • УЗНАЙТЕ БОЛЬШЕ
  • Во время игры в Valorant мой монитор может отображать 240/360 Гц при разрешении 1920x1080. Но при переключении на разные разрешения (например: 1680x1050/1280x960/1280x1024/1024x768) частота обновления фиксировалась на 144 Гц. Что я должен делать?

  • УЗНАЙТЕ БОЛЬШЕ