A. Màn hình LCD|B. Chân đế màn hình|C. Đế màn hình

D. Dây nguồn|E. Cáp DP|F. Tài liệu hướng dẫn sử dụng

G. Cáp HDMI|H. S Switch|I. Shield

Illustration of package contents
Illustration of package contents

Note

Hình ảnh hiển thị ở đây có thể khác với sản phẩm thực tế và sản phẩm được cung cấp tại khu vực của bạn.

Content
Thiết lập
S Switch (truy cập cài đặt nhanh)
Điều chỉnh màn hình
Lắp Shield (bước tùy chọn)
Thiết lập
S Switch (truy cập cài đặt nhanh)
Điều chỉnh màn hình
Lắp Shield (bước tùy chọn)

Thiết lập

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (truy cập cài đặt nhanh)

A. Dành cho PUBG|B. Dành cho APEX|C. Dành cho Fortnite

Quick settings access by S Switch.
Quick settings access by S Switch.

Điều chỉnh màn hình

Adjust the viewing angle.
Adjust the viewing angle.

Lắp Shield (bước tùy chọn)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

Điều chỉnh nhanh từ thiết bị di động

ZOWIE Sync: Kết nối và điều khiển màn hình chỉ bằng một lần chạm qua ứng dụng di động.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*Vị trí cảm biến NFC có thể thay đổi tùy theo thiết bị.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.