A. LCD 螢幕|B. 螢幕支架|C. 螢幕底座

D. 電源線|E. DP 線|F. 使用手冊

G. HDMI 線|H. S Switch|I. 遮罩

Illustration of package contents
Illustration of package contents

備註

此處顯示的圖片可能與實際內容物及您所在區域提供的產品有所不同。

內容
設定
S Switch(快速設定存取)
螢幕調整
安裝遮罩(選用步驟)
設定
S Switch(快速設定存取)
螢幕調整
安裝遮罩(選用步驟)

設定

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch(快速設定存取)

A. 絕地求生|B. APEX|C. Fortnite

Quick settings access by S Switch.
Quick settings access by S Switch.

螢幕調整

Adjust the viewing angle.
Adjust the viewing angle.

安裝遮罩(選用步驟)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

使用行動裝置快速調整

ZOWIE Sync:只要輕觸一下,即可使用行動應用程式連接並控制螢幕。

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*NFC 感應器位置可能因裝置而異。

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.