A. LCD monitör|B. Monitör standı|C. Monitör tabanı

D. Güç kablosu|E. DP kablosu|F. Kullanıcı belgeleri

G. HDMI kablosu|H. S Switch|I. Koruyucu kalkan

Illustration of package contents
Illustration of package contents

Note

Burada gösterilen görseller, gerçek içerikten ve bölgeniz için sunulan üründen farklı olabilir.

Content
Kurulum
S Switch (hızlı ayarlara erişim)
Ekran ayarı
Koruyucu kalkanın takılması (isteğe bağlı adım)
Kurulum
S Switch (hızlı ayarlara erişim)
Ekran ayarı
Koruyucu kalkanın takılması (isteğe bağlı adım)

Kurulum

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (hızlı ayarlara erişim)

A. PUBG için|B. APEX için|C. Fortnite için

Quick settings access by S Switch.
Quick settings access by S Switch.

Ekran ayarı

Adjust the viewing angle.
Adjust the viewing angle.

Koruyucu kalkanın takılması (isteğe bağlı adım)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

Mobil cihazdan hızlı ayarlama

ZOWIE Sync: Mobil uygulamayı kullanarak yalnızca tek dokunuşla monitörünüzü bağlayın ve kontrol edin.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*NFC sensörünün konumu cihaza göre değişebilir.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.