A. LCD 모니터|B. 모니터 스탠드|C. 모니터 받침대

D. 전원 코드|E. DP 케이블|F. 사용자 설명서

G. HDMI 케이블|H. S Switch|I. Shield

Illustration of package contents
Illustration of package contents

Note

여기에 표시된 이미지는 실제 구성품 및 해당 지역에 공급되는 제품과 다를 수 있습니다.

컨텐트
설정
S Switch (빠른 설정 바로가기)
화면 조정
Shield 설치(선택 사항)
설정
S Switch (빠른 설정 바로가기)
화면 조정
Shield 설치(선택 사항)

설정

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (빠른 설정 바로가기)

A. PUBG용|B. APEX용|C. Fortnite용

Quick settings access by S Switch.
Quick settings access by S Switch.

화면 조정

Adjust the viewing angle.
Adjust the viewing angle.

Shield 설치(선택 사항)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

모바일 기기에서 빠르게 조정

ZOWIE Sync: 모바일 앱을 사용해 한 번의 탭으로 모니터를 연결하고 제어하세요.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*NFC 센서 위치는 기기에 따라 다를 수 있습니다.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.