A. LCD monitor|B. Monitor stand|C. Monitor base

D. Power cord|E. DP cable|F. User documents

G. HDMI cable|H. S Switch|I. Shield

Illustration of package contents
Illustration of package contents

Note

The images shown here may differ from the actual contents and the product supplied for your region.

Content
Setup
S Switch (quick settings access)
Screen adjustment
Installing the Shield (optional step)
Setup
S Switch (quick settings access)
Screen adjustment
Installing the Shield (optional step)

Setup

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (quick settings access)

A. For PUBG|B. For APEX|C. For Fortnite

Quick settings access by S Switch.
Quick settings access by S Switch.

Screen adjustment

Adjust the viewing angle.
Adjust the viewing angle.

Installing the Shield (optional step)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

Quick adjustment from mobile device

ZOWIE Sync: Connect and control your monitor with just a tap using the mobile app.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*NFC sensor location may vary by device.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.