Search history
Clear
Application
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Learn more
Specification
The Wired remote port is used to connect to a wired remote control. What is the maximum distance supported by the wired remote control?
The maximum distance supported by the wired remote control is 10 meters.
Learn more
Further Query
The Wired remote port is used to connect to a wired remote control. What is the maximum distance supported by the wired remote control?
The maximum distance supported by the wired remote control is 10 meters.
Learn more
My remote control is not working. What can be done to fix it?
Please follow below steps for troubleshooting:
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video
Learn more
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video
Learn more
3D is not working or getting lost sync on my projector. How can I fix it?
Please check the following settings to correct this issue.
- If the source gives the correct 3D information to the projector, the projector will switch to 3D automatically.
If your source is from PC or steaming content, please select the correct 3D format via OSD Display > 3D > 3D mode. - Check the user manual and make sure that the resolution of your content supports 3D.
- Press the DLP Link button on your 3D glasses to resync the projector and 3D glasses.
- Please try to change the HDMI EDID setting to Standard.
- Make sure that no other Projectors are sending DLP Link signals in the same room.
- Watching in a relatively dark environment to avoid being influenced by other light sources.
- Check the battery level on your DLP 3D Glasses
- Adjust the watching distance and screen size within a normal range(Specs)
- Stay in a fixed position, and try not to move too far/quickly on your head/3D glasses.
- Try to adjust a colorful setting on the projector and avoid external light direct to your 3D glasses/screen.
- If it's still not working, the issue might be caused by Hardware margin. You can switch to another projector or 3D glasses for a try.
Learn more
The light source LED indicator is flashing orange while the projector works normally. What does this mean?
The projector's filter should be replaced. Please replace the filter and reset the timer, and the flashing LED will stop.
Learn more
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Learn more
